ŔÖĚěĚĂappĎÂÔŘ

Quality Levels Clause Examples

Quality Levels.ĚýPrices are based on quality levels commensurate with normal processing. If a different quality level is required, Buyer must specify its requirements, as approved in writing by Seller, and pay any additional costs that may be applicable.
View SourceView Similar (6)
Quality Levels.ĚýThe acceptable incoming quality level goal from ACS to IBM is defect free Product and Spare Parts conforming to the Product and Spare Parts Specification referenced in Attachment 3. ACS is required to make every effort to produce Product and Spare Parts meeting this goal. A continuous Product and Spare Parts and process improvement program shall be maintained by ACS to help in achieving this goal.
View SourceView Similar (2)
Quality Levels.ĚýThe Product shall (i) be free from commercial defect as is reasonable according to customary industry practices in the California for premium outdoor cannabis cultivated in California, (ii) meet the potency and quality standards set forth by Purchaser as described in Section 2 at the time of purchaserâ€� inspection, which shall occur no later than fourteen (14) days after pickup, (iii) be grown and harvested in accordance with all Applicable Laws, and (iv) not be infected, adulterated or misbranded as provided under Applicable Laws. Purchaser may reject any Cannabis made available for pickup hereunder that does not fully comply in all particulars with the conditions set forth in Sections 2.1, 2.2, 2.4, and this Section 6.
View SourceView Similar (2)
Quality Levels.Ěý8 8.7 Defect Containment ......................................... 8 8.8 Escalation Path ............................................ 8 8.9 Defect Root Cause analysis ................................. 8
View SourceView Similar (2)
Quality Levels.ĚýSure will offer the Availability ratio for the Ordered Leased Circuit Services, as described and measured in section 3.10 of Schedule 4.
View Source
Quality LevelsĚýa. RAS Criteria. StorageTek shall maintain (i) throughout [**], and (ii) for a period of [**] after the date of last Delivery of each type of Product (provided IBM pays for the Product Engineering Services unless it is not required to do so and StorageTek is still providing Product Engineering Services for its own distribution of Equipment or Devices); the following reliability, availability and service ("RAS") levels for the Products: SERVICE CALL CALCULATION RAS Criteria [**] [**] Service Call Rate [**] [**] [**] [**] [**]
View Source
Quality Levels.ĚýDelivered Quality is deemed to be equal to Manufacturing Delivered Quality and the target is 99% for products with an integral Power Supply, and 99.5% for modules and plug-in option cards. Madge and SCI will review the Delivered Quality each moxxx xs set forth in Attachment "C".
View Source
Quality Levels.ĚýThe standard for acceptance or rejection of material by Enrich for use in the Product or process shall be based upon the definitions and criteria defined in each Product specification. 6.7.1 Enrich may elect to perform a 100% test/inspection of all material and/or Product delivered by Imagenetix. Imagenetix understands that Enrich's election to perform this 100% test/inspection in no way relieves Imagenetix of Imagenetix's responsibilities to deliver materials of a sufficient quality level to comply with the aforementioned standard (i.e., said test/inspection will not be used as a screening by Enrich to overcome deficiencies and/or inadequacies of Imagenetix's process or Product) and that the statistical results of these inspection/tests (whether or not the material is retained by Enrich or returned to Imagenetix) shall determine for historical recordation, and for all other purposes, the acceptability and/or quality level of the Product received. 6.7.2 Enrich and Imagenetix understand and agree to modify or amend the requirements of these standards as may be required due to revisions in regulations or standards of governing agencies or of sovereign governments controlling the sale or distribution of the Products.
View Source

Related to Quality Levels

  • Service Levels All service level requirements will be set forth in Exhibit A (“XXXX.xxx Referral Service Level Requirementsâ€�). Recipient Xxxxxx agrees to adhere, and encourage Recipient Agent’s adherence, with the version of the XXXX.xxx Referral Service Level Requirements in effect at the time XXXX.xxx identifies the Referral to Recipient Broker/Agent.

  • Safety Objectives 55.1 The Parties recognise the potentially hazardous nature of the construction industry. To this end, the Parties to the Agreement are committed to continuous improvement in occupational health and safety standards through the implementation of an organisational framework which involves all Parties in protecting Employeesâ€� health and safety. 55.2 In meeting these objectives, the Parties have agreed to consider a broad agenda through the consultative processes established by this Agreement. Such an agenda will include: (a) measures designed to include the safe operation of plant and equipment; (b) training issues including specific hazards, health and safety systems, and site induction; (c) management of occupational health and safety through a comprehensive approach which aims to control hazards at their source, reduce the incidence and costs of occupational injuries and illnesses; and (d) risk of fatigue (see clauses 38.5 and 38.6). 55.3 The Employer will comply with all relevant work health and safety legislation, including the OHS Act, workers compensation legislation, regulations, codes of practice and relevant and appropriate Australian and Industry Standards produced or recognised by WorkSafe Victoria.

  • Service Level In the event that League InfoSight discovers or is notified by you of the existence of Non-Scheduled Downtime, we will use commercially reasonable efforts to determine the source of the problem and attempt to resolve it as quickly as possible.

  • Service Level Expectations Without limiting any other requirements of the Agreement, the Service Provider shall meet or exceed the following standards, policies, and guidelines:

  • Staffing Levels To the extent legislative appropriations and PIN authorizations allow, safe staffing levels will be maintained in all institutions where employees have patient, client, inmate or student care responsibilities. In July of each year, the Secretary or Deputy Secretary of each agency will, upon request, meet with the Union, to hear the employeesâ€� views regarding staffing levels. In August of each year, the Secretary or Deputy Secretary of Budget and Management will, upon request, meet with the Union to hear the employeesâ€� views regarding the Governor’s budget request.